Free Shipping

On orders over $500

Price Match Guarantee

We'll match it

30 Day Returns

Shop with confidence

Expert Advice

Speak to our team

Description

Be prepared for future digital music technologies with the C49 Preamplifier.

The C49 features the DA1 Digital Audio Module, which can be replaced by new modules as new digital audio technologies are developed. This will allow you to keep your C49 up to date with digital music formats and viable well into the future.

The C49 comes with a multitude of inputs. For analog, it has 2 balanced and 3 unbalanced, along with 2 phono inputs (comprised of 1 Moving Coil and 1 Moving Magnet) for connecting turntables. On the digital side, it has 6 inputs housed in the DA1 module. The inputs are: 2 coaxial, 2 optical, 1 USB and 1 proprietary MCT (for use with our MCT series of SACD/CD Transports). The DA1 is powered by an 8-channel, 32-bit Digital-to-Analog Converter (DAC) that is used in Quad Balanced mode; it supports up to DSD256 and DXD 384kHz for playback of high resolution audio. In total, the C49 has 13 inputs, and each can be given user-friendly names to simplify system setup and control.

For connecting to your amplifier and the rest of your home audio system, the C49 has 2 balanced variable outputs, 2 unbalanced variable outputs, and 1 unbalanced fixed output. The outputs are designed for easy use when bi-amping your speakers so that neither your highs or lows are inadvertently turned off. Your audio sources can be fine tuned via the bass and treble tone controls. The C49 can be seamlessly integrated into your home theater system via Home Theater Pass Through. Power Control ports allow for the easy turn on/turn off of other connected McIntosh components, while the Data Ports can send remote control commands to connected source components.

Our High Drive headphone amplifier with Headphone Crossfeed Director (HXD®) is also included.

McIntosh C49 Preamplifier The C49 comes complete with classic McIntosh design staples such as a black glass front panel, knobs, an illuminated logo and aluminum end caps. Pair it with a variety of amplifiers, turntables, CD players, tuners, speakers, power controllers and room correction devices to make a complete home audio system.

Number of Channels 2
Total Harmonic Distortion 0.005%
Frequency Response +0, -0.5 dB from 20 Hz to 20 kHz
+0, -3 dB from 15 Hz to 100 kHz
Maximum Volts Out (Balanced / Unbalanced) 16V RMS / 8V RMS
Sensitivity High Level (Balanced / Unbalanced) 900 mV / 450 mV
Sensitivity Phono (Moving Coil) 0.45 mV
Sensitivity Phono (Moving Magnet) 4.5 mV
Signal to Noise Ratio (High Level) 100 dB
Signal to Noise Ratio (Moving Coil) 80 dB
Signal to Noise Ratio (Moving Magnet) 82 dB
Voltage Gain (High Level) 15 dB
Voltage Gain (Moving Coil) 60 dB
Voltage Gain (Moving Magnet) 40 dB
Input Impedance (Balanced / Unbalanced) 44K Ohm / 22K Ohm
Connectivity
Balanced Input 2
Unbalanced Input 3
Phono Input Moving Coil 1 (adjustable)
Phono Input Moving Magnet 1 (adjustable)
Upgradeable Digital Audio Module Yes: DA1
Digital Coaxial Input 2
Digital Optical Input 2
Digital MCT (DIN) Input 1
Digital USB Input 1
HDMI (ARC) Input 0
Digital AES/EBU Input 0
Balanced Fixed Output 0
Balanced Variable Output 2
Unbalanced Fixed Output 1
Unbalanced Variable Output 2
Headphone Output 1/4" High Drive with Headphone Crossfeed Director (HXD®)
Input Level Match Yes, +/- 6 dB
Home Theater PassThru Yes
Unbalanced Analog Connector Type Standard
Service Port 1
Control
Tone Controls Bass and Treble
Tone Bypass and Input Assign Yes
RS232 Control Input Yes
Power Control Output 1 Main, 2 Trigger
Rear Panel Data Port 4
Rear Panel IR Sensor Input Yes
General Specifications
Multi-Chassis or Single Single, two layer
Output Meters No
Vacuum Tube or Solid State Solid State
Power Consumption (On) 30 Watts
Weights & Dimensions
Dimensions (W × H × D) 17.5" (44.45 cm) × 6" (15.2 cm) × 18" (45.72 cm)
Weight 23 lbs (10.4 kg)
Shipping Weight 37.5 lbs (17 kg)

Customer Reviews

No reviews yet.

Have a question?

Our team of audio specialists are
here to help you find the perfect setup.

You may also like