Description
The THOR DRM95-20A Smart Series is a high-capacity AC mains filtration and surge protection solution designed to provide whole-circuit filtered protection for sensitive electronic equipment.
At the heart of the DRM95-20A is THOR’s Dynamic Active Tracking filter technology, an advanced active filtration system designed to clean unwanted electrical noise while incorporating comprehensive spike and surge protection. Unlike conventional filtering systems that may operate over only a limited section of the power waveform, Dynamic Active Tracking works across both the upward and downward curves of the sine wave.
According to THOR, this technology filters approximately 70% more frequencies compared with other filters, helping provide cleaner power to sensitive electronic devices. It is designed to help reduce electrical interference that can contribute to error codes, file corruption, system hangs and programming glitches. THOR Din Rail -DRM95 20 AMP
Advanced Surge Protection
The DRM95-20A provides 2520 Joules of maximum energy dissipation and has survived surge hits exceeding 150kA. Protection is provided across all three conductors — Line-Neutral (L-N), Line-Earth (L-PE) and Neutral-Earth (N-PE) — for comprehensive mains protection.
With a reaction speed of less than 1 nanosecond, the unit is designed to respond extremely quickly to potentially damaging electrical events. THOR Din Rail -DRM95 20 AMP
Spike & Surge Test Technology
Integrated Spike & Surge Test technology allows the surge protection circuit to be checked to verify that it remains intact and is functioning as designed.
This makes the DRM95-20A particularly suited to installations where dependable power protection is required for sensitive electronics and equipment. THOR Din Rail -DRM95 20 AMP
Designed for Whole-Circuit Protection
The DRM95-20A can help protect equipment and systems affected by electrical disturbances, including:
- AV and sound circuits
- LED lighting systems
- Air-conditioning systems
- PCBs and other sensitive electronics
- Equipment affected by speaker hiss or hum
- Systems experiencing picture pixelation, blurring or scrambling
- Systems affected by subwoofer thumping or electrical interference THOR Din Rail -DRM95 20 AMP
Technical Specifications
Model: DRM95-20A
Capacity: 20 Amp
Supply Voltage: 230–240VAC, 50Hz
Dimensions: 70mm (W) × 90mm (H) × 60mm (D)
Maximum Energy Dissipation: 2520 Joules
Clamping Voltage: 300V
Nominal Discharge Current: 10kA
Maximum Discharge Current: 25kA
Reaction Speed: Less than 1 nanosecond
Earth Leakage: Less than 1mA
Operating Temperature: -10°C to +60°C
Protection Modes: L-N, L-PE and N-PE
Installation: Requires an electrician
Warranty: 6-Year Replacement Warranty
