JBL SDA-7120 Dynamic Class G Power Amplifier

AU$8,999.00

We are the authorised retailer for this brand in Australia.
Exclusive Sale by enquiry only, to ensure authenticity of the product and to provide an outstanding service.
Please call 1300 668 398 to speak to us (we are open 7 days a week) or click enquiry to send us a message.

Aussie Stock    SSL Secure Payment    Fast Despatch

KLAPP AV payment options Bank ZIP paypal

Free Shipping within Australia on all orders valued $500 or over (Conditions apply).

Category: Tags: ,

Description

The JBL Synthesis SDA-7120 delivers seven channels of dynamic class G amplification with modern networking capability, audiophile sound and exceptional flexibility.

The JBL Synthesis SDA-7120 delivers seven channels of dynamic Class G amplification with modern network capability, audiophile sound and exceptional flexibility. With 100 watts per channel (all channels driven), 0.002% harmonic distortion balanced and single ended inputs, RS232 and IP control as well Danteâ„¢ audio networking, the SDA-7120 is a splendid choice for a broad range of applications.

 

FEATURES:

  • Dynamic Class G amplification
  • Danteâ„¢ audio networking
  • 100 watts @8 Ohms with seven channels driven
  • Balanced and single ended inputs
  • Trigger in and out
  • Ethernet, RS232 control

 

Powerful and Dynamic

Class G amplification offers the best characteristics Class A and Class A/B designs. Conventional Class A designs do not suffer from crossover distortion and is exceptionally transparent offering a high level of realism. However, a solely Class A design is extremely inefficient as it will always be drawing full power even with no signal to amplify, for this reason, Class A amplifiers usually offer lower power output. Class AB design is much more common and far more efficient than pure Class A, but it suffers from crossover distortion at low levels which clouds spatial details and transparency.

Class G offers greater efficiency and transparency, with less wasted heat energy than class A. Like a hybrid car engine, Class G implements multiple power supplies rather than just a single supply. The first power supply is of lower power and within this region, the SDA-7120 runs in pure Class A, which has no crossover distortion. If a dynamic signal is received that goes beyond the capability of this first power supply, the secondary supply is gradually brought in up to full rated power output as required. This gives a very efficient design as additional power is only used when required. Modern high-speed silicon allows us the make this switch at speeds well beyond the audio bandwidth.

Flexible

The SDA-7120 features Danteâ„¢ audio networking so you can connect with the JBL Synthesis SDR-35 AVR and SDP-55 immersive surround sound processor as well as other Dante-enabled products over Ethernet-based networks via a Cat5e or Cat 6 cable. Dante audio networking uses a standard IP network to transmit high-quality, uncompressed multi-channel audio with near-zero latency. It’s the most flexible, reliable, and easy-to-manage audio networking solution available, and provides the lowest cost of ownership by dramatically reducing cabling and labor costs as well as eliminating issues with interference, crosstalk and signal degradation associated with analog cable. The SDA-7120 is capable of receiving high-resolution audio via Dante. Signal routing and system configuration with Dante is fast, simple, and incredibly flexible. Once the network is configured, signal routing and other system settings are stored safely in the Dante devices themselves, so they are automatically restored if a device is power-cycled.

 

General Specifications:

  • Seven channels driven, 4Ω / 8Ω, 20Hz – 20kHz: 140W / 100W
  • Five channels driven, 4Ω / 8Ω, 1kHz: 175W / 110W
  • Two channels driven, 4Ω / 8Ω, 1kHz: 225W / 140W
  • Harmonic distortion, 80% power, 8Ω at 1kHz: 0.002%
  • Input sensitivity 50W / 8Ω: 800mV RMS (RCA Type), 1.6V RMS (XLR Type)
  • Signal/Noise ratio (A-wtd) 50W / 8Ω: 105dB
  • Input impedance: 10kΩ
  • Frequency response: 20 – 20kHz +/-0.05dB
  • Mains voltage: 110–120V or 220–240V, 50–60Hz
  • Maximum power consumption: 1.5kW
  • Dimensions W x H x D (including feet, control knob and speaker terminals): 433 x 425 x 177mm
  • Weight (net): 18kg
  • Weight (gross): 19.7kg

Audio Specifications:

  • Seven channels driven, 4Ω / 8Ω, 20Hz – 20kHz 140W / 100W
  • Five channels driven, 4Ω / 8Ω, 1kHz 175W / 110W
  • Two channels driven, 4Ω / 8Ω, 1kHz 225W / 140W
  • Harmonic distortion, 80% power, 8Ω at 1kHz 0.002%
  • Input sensitivity 50W / 8Ω 800mV RMS (RCA Type), 1.6V RMS (XLR Type)
  • Signal/Noise ratio (A-wtd) 50W / 8Ω 105dB
  • Input impedance 10kΩ
  • Frequency response 20 – 20kHz +/-0.05dB
  • Mains voltage 110–120V or 220–240V, 50–60Hz
  • Maximum power consumption 1.5kW
  • Dimensions W x H x D (including feet, control knob and speaker terminals) 433 x 425 x 177mm
  • Weight (net) 18kg
  • Weight (gross) 19.7kg

 


Klapp AV is an iconic Audio Visual leader serving the audiophile connoisseurs and enthusiasts for over 60 years. With loyal customers all around Melbourne, nationally and across the globe, we offer the biggest brands and one of the best collections of top audio/visual models in the World.





Additional information

Brand

JBL

Reviews

There are no reviews yet.

Be the first to review “JBL SDA-7120 Dynamic Class G Power Amplifier”