Bowers & Wilkins CDA-16 16-channel Distribution Power Amplifier
AU$3,299.00
✓ Aussie Stock ✓ SSL Secure Payment ✓ Fast Despatch
Free Shipping within Australia on all orders valued $500 or over (Conditions apply).
🛈 Click here to send a product enquiry
Category: Amplifiers
Tags: Amplifier, Power Amp
Description
The power to impress
Our 16-channel distribution power amplifier can drive a mix of in-ceiling or in-wall speakers in up to eight rooms simultaneously, all from one compact, efficient component.
Distribution Amplifier
Ensure the best possible sound from your in-wall or in-ceiling Custom Installation loudspeakers with our powerful yet compact distribution amplifier.
The CDA-16 distribution power amplifier can drive any Bowers & Wilkins custom installation speaker to new heights of performance. Offering 16 channels of power, the CDA-16 can enable your whole home with sound yet takes up minimal space thanks to its compact 1U design. Its configurable specification supports bridging of its Class D stereo channels into even more powerful mono outputs, if needed.
CDA-16 has been engineered to work with any existing Bowers & Wilkins custom installation speaker. With the ability to drive 16 channels or 8 zones in a compact 1U design, CDA-16 gives you the maximum performance with the minimum rack space.
Compact powerhouse.
Offering 16 channels of power, the CDA-16 can enable your whole home with sound yet takes up minimal space thanks to its compact 1U design.
Offering 16 channels of power, the CDA-16 can enable your whole home with sound yet takes up minimal space thanks to its compact 1U design.
Specifications:
Load impedance range: >3Ω per channel (>6Ω in bridge mode)
Output Power per
channel, non-clipped:
>50W into 8Ω
>100W into 4Ω
Output Power bridge mode,
non-clipped:
>200W into 8Ω
Output Power total,
all channels:
>400W short term
>200W continuous average
DC offset voltage: <50mV
Frequency Response (-3dB): <10Hz to >50kHz, any load impedance
Frequency response accuracy
20Hz-20kHz:
±0.5dB
Signal to Noise ratio
(Ref. 50W/8Ω):
>100dB A-Weighted
THD+N (1kHz, 12.5W, 4Ω): typically 0.05%
Voltage Gain: 34.9dB to – infinity, adjustable
Input impedance: 15KΩ
Maximum input voltage: 6.8V peak (4.8V rms sine wave)
Signal sense threshold: 2.5mV (independent of Gain setting)
Wake-up time: <0.2s (If other zones active)
<2s (From all zones inactive)
Turn-off time: 15 minutes from last signal detected
12V trigger input threshold: typically 3V (recommended input is 5-15V)
Controls & Indicators
Front panel: 1 x Power LED (unit active – White, Fault – Red)
8 x Zone status LEDs (Signal present – White, Fault – Red)
Rear panel 8 x 2-position DIP switches (link to global input)
1 x 3-position switch (power mode: on, auto detect, 12V trigger)
8 x input gain control with Clip indicator LEDs
Connectors
Input 8 x RCA (pair) Phono socket, line in (global in shared with Zone 8)
Output 1 x RCA (pair) Phono socket (global out)
8 x 5.08mm Pitch 4-way Phoenix Combicon style
12V trigger control 1 x 3.5 mm jack – 12V trigger IN
1 x 3.5 mm jack – 12V trigger OUT (Maximum 100mA pass-through)
Power
Power consumption: <0.5W All zones inactive
<45W All zones idling
300W maximum average
1,000W peak
AC supply: 100-240V 50/60Hz
AC inlet: IEC C14, switched
channel, non-clipped:
>50W into 8Ω
>100W into 4Ω
Output Power bridge mode,
non-clipped:
>200W into 8Ω
Output Power total,
all channels:
>400W short term
>200W continuous average
DC offset voltage: <50mV
Frequency Response (-3dB): <10Hz to >50kHz, any load impedance
Frequency response accuracy
20Hz-20kHz:
±0.5dB
Signal to Noise ratio
(Ref. 50W/8Ω):
>100dB A-Weighted
THD+N (1kHz, 12.5W, 4Ω): typically 0.05%
Voltage Gain: 34.9dB to – infinity, adjustable
Input impedance: 15KΩ
Maximum input voltage: 6.8V peak (4.8V rms sine wave)
Signal sense threshold: 2.5mV (independent of Gain setting)
Wake-up time: <0.2s (If other zones active)
<2s (From all zones inactive)
Turn-off time: 15 minutes from last signal detected
12V trigger input threshold: typically 3V (recommended input is 5-15V)
Controls & Indicators
Front panel: 1 x Power LED (unit active – White, Fault – Red)
8 x Zone status LEDs (Signal present – White, Fault – Red)
Rear panel 8 x 2-position DIP switches (link to global input)
1 x 3-position switch (power mode: on, auto detect, 12V trigger)
8 x input gain control with Clip indicator LEDs
Connectors
Input 8 x RCA (pair) Phono socket, line in (global in shared with Zone 8)
Output 1 x RCA (pair) Phono socket (global out)
8 x 5.08mm Pitch 4-way Phoenix Combicon style
12V trigger control 1 x 3.5 mm jack – 12V trigger IN
1 x 3.5 mm jack – 12V trigger OUT (Maximum 100mA pass-through)
Power
Power consumption: <0.5W All zones inactive
<45W All zones idling
300W maximum average
1,000W peak
AC supply: 100-240V 50/60Hz
AC inlet: IEC C14, switched
Thermal
Thermal dissipation 1.7 BTU/hr (standby),
150 BTU/hr (Idle),
400 BTU/hr (max)
Dimensions
Height:
Width:
Depth:
44.5 mm (1.8in) 1U [55.5 mm (2.2in) plus feet]
437 mm (17.2in)
310 mm (12.2in)
Net weight: 4.5kg (9.9lb)
Finish Black
Klapp AV is an iconic Audio Visual leader serving the audiophile connoisseurs and enthusiasts for over 60 years. With loyal customers all around Melbourne, nationally and across the globe, we offer the biggest brands and one of the best collections of top audio/visual models in the World.
Additional information
| Brand | Bowers & Wilkins |
|---|
You must be logged in to post a review.
Reviews
There are no reviews yet.